Product
Products
Home Accessories

Cable resistance Tester-ATester

Cable resistance Tester-ATester

This cable tester is designed to assist in electrical monitoring of electric floor heating products. It has a built-in 9V battery that sends tiny currents to detect changes in resistance.  When the resistance value changes, it means that the electric floor heating system is at risk of being damaged, the alarm is issued to remind the installer to check the cause.

It has three highly insulated stainless steel clips that allow the installer to complete the connection to the electric floor heating in seconds.

  • Weight :

    787g(AWC9)/699g(AWC5)
  • Functions :

    Wiring Center Connection Box
  • Approvals :

    CE(Include RED)/UKCA
  • IP Rating :

    IP 20
  • Warranty :

    2 Years
  • Lead Time :

    45 Days
  • Shipping Port :

    Ningbo/Shanghai Port
  • Order(MOQ) :

    500 pcs

Cable resistance Tester-ATester

It is used to monitor underfloor heating cables before installation and during installation

 

It is connected with the heating cable L, N, E three lines, so that the entire heating cable system forms a loop, if the cable is damaged, the buzzer inside the product will issue an alarm sound to inform the installation personnel that the product has been damaged. If the entire cable is not damaged, the product will remain silent.

 

 

We have designed special clamps in red, green and black to facilitate the installation workers to connect the heating cable.  At the same time, a high insulation rubber insulation sleeve is designed between each clip to avoid the wrong alarm caused by wire contact each other.

Specifications

9V batteries(included)
Leads Short Circuit Open Circuit
L1,L2 N/A X
G,L1 X N/A
G,L2 X N/A
G&L1+L2 X N/A

F&Q

Q1:When can I got the quotation?

A1: We usually quote within 24 hrs after get you detail inquiry. If you are very urgent to get the price, please call us or write us an email, so that we will regard your inquiry priority.

 

Q2:How can I get the samples?

A2:We appreciated that you can accept to pay the sample cost and sample freight.

 

Q3:What’s your type of transport?

A3:We will help you to choose the best transport way according to your detail requirements. by sea or by air.

 

Q4:What is your terms of payment ?

A4:Normally,We accept T/T,L/C and so on.

 

Q5:What are your main products??

A5:Electrical Heaters and HVAC Controllers. 

 

Q6:who are we?

A6:We have 15+ years of experience in serving importers, brand owners, professional distributors, and large supermarket chains. 

We are good at creating and supporting customers' personalized product customization solutions.

 

 

 

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Wireless Wiring Centre for Floor Heating System
Wireless Wiring Centre for Floor Heating System Boiler Central Heating Radiators

AWC9/AWC5 is a 9/5 zone wiring centre for controlling valves/actuators, pumps, and boilers in different zones. It should be used with proper thermostats to work normally and enjoy the warranty.AWC9/AWC5 can be used to control any actuator or valve which requires a 230v AC signal to open. For mid-position valves and those requiring a closing signal, a changeover relay is required. At the same time, AWC9/AWC5 offers the ability to operate a boiler or other heat source through a volt-free output.

AMV01

AMV01 is a high-efficiency, long-life electric ball valve that is widely used in pipeline switch control in HVAC systems. It consists of two parts: the electric actuator and the valve. Inside the actuator is an integrated high-performance synchronous motor. It also contains a limit switch. When the valve needs to be open or close, power is supplied to the 6W synchronous motor. Turning on/off of the valve takes about 5-15 seconds. Compared with 2-wire electric valves, this valve is more energy efficient and has a longer service life.

Thermal Actuator control-AA01

The thermal actuator is suitable to be mounted on all manifolds, thermostatic valve bodies and three-way valves. The actuator is made for 230V supply in normally open.

Copper Distribution manifold-AM01

AM01 manifold is a built-in adjustable valve core that can manually preset the flow rate as needed. High quality copper bar is hot extrusion formed to ensure uniform texture without any flaws. The sealing elements are made of premium materials, which are high-temperature resistant, wear-resistant and anti-aging. Equipped with high-quality thermostatic valve core, it provides precise and stable control. It is the core component of manifold distribution.

ART01

Suitable for water/electric heating thermostats, it can work with Alexa and Google Home. You can program the thermostat to operate automatically, and  control it anytime through the APP. With Wifi connection, this smart thermostat can be controlled remotely via smartphones. It is compatible with voice assistants like Alexa and Google Home for hands-free voice control. The thermostat can be programmed for timed schedules or self-learning modes to optimize heating cycles automatically. It provides great convenience to adjust heating remotely and ensure a comfortable temperature anytime.

P01

It can control any 120vac heaters, electric heater heating cables, heat lamps, and engine heaters.

ATester Pro

This cable tester is designed to assist in electrical monitoring of electric floor heating products.It is the only tester in the world that visually displays resistance values and can be tested during electrical underfloor heating installation. It combines real-time resistance testing and process inspection capabilities to give the installer digital and auditory visibility throughout the installation process to avoid any risk during installation and floor covering installation.

Cable resistance Tester-ATester

This cable tester is designed to assist in electrical monitoring of electric floor heating products. It has a built-in 9V battery that sends tiny currents to detect changes in resistance.  When the resistance value changes, it means that the electric floor heating system is at risk of being damaged, the alarm is issued to remind the installer to check the cause. It has three highly insulated stainless steel clips that allow the installer to complete the connection to the electric floor heating in seconds.

AT Floor sensor

There are two materials to choose from. One is soft materials. One is hard material. They match the full range of Valleywarm thermostats. 

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

home

products

WhatsApp

Contact Us